Posts

Showing posts from July, 2015

circuitruy of water, flow chart of air con inspection and flow chart to check electrical DB

Image
Image
How to Set Up an Oxy Acetylene Torch Edited by  Rane, Teresa, Wolfdominic, Mark Davis  and 12 others An Oxygen Acetylene torch is a tool used to bond two pieces of metal together by means of extreme heat. In addition, Oxygen Acetylene torches can be fitted with a "Cutting Head" and used to cut one solid piece of metal into two or more pieces. 1 Clean the nozzle on the head.  This should be done with a fine, round metal file. Just make sure that this nozzle hole is unobstructed. If holes are obstructed, a torch tip bore cleaning tool may be necessary. Ad 2 Securely fasten the "head" of the torch on the end of the hoses.  It should thread into a socket where both the Oxygen and Acetylene hoses come together. Usually this joint is brass. 3 Tighten both valves on the "head" that you just secured in the socket.  Make sure these valves are shut completely; otherwise, your gas/air mixtures will be off. 4 Turn on